The T1-C contains extra hardware to control a variety of outputs that almost all installations and conversions would require.

This unit’s outputs will control;

-Brake lights. Brake light output is activated when the brake pedal is depressed or when regenerative braking exceeds a certain threshold.

-Inverter 12V power. Inverter 12V power should only be applied at the correct point in the power up sequence, after CAN transmission has been initiated.

-Inverter cooling fan control. This output will trigger the inverter cooling fan at a user adjustable inverter coolant temperature, adjusted via the touchscreen.

-High voltage positive contactor.

-High voltage negative contactor.

-High voltage pre-charge relay.   The controller will close the negative contactor, then the precharge relay, then after a set delay, it will close the positive contactor. this is to avoid welded contactors.

-The controller can also be configured to control a charger and DC/DC converter.

All prices in USD$